TOOLS North Yorkshire

Listings
  • Mitsubishi FX10K Wire EDM

    TOOLS Leeming Bar (North Yorkshire) May 11, 2024 5500.00 £

    Mitsubishi FX10K Wire EDM ⭕ Mitsubishi FX10K Wire EDM in great shape and has been well maintained since purchased new in 2009. X Axis Travel 13.77 Y Axis Travel 9.81 Z Axis Travel 8.46 Maximum Workpiece Weight 1100 lbs. Minimum Floor Space Needed 92 ...

  • VEECO MS 40 Fully Automatic Portable Leak Detector

    TOOLS Wilton (North Yorkshire) May 11, 2024 3000.00 £

    VEECO MS 40 Fully Automatic Portable Leak Detector ⭕ VEECO MS 40 Fully automatic portable leak detector Inlet pressure: 7.5 torr Built-in test diagnostics Built-in turbo and roughing pumps In good working order and excellent condition. Less than 2 yr...

  • Altendorf F45 Panel Saw

    TOOLS Grosmont (North Yorkshire) May 11, 2024 4000.00 £

    Altendorf F45 Panel Saw ⭕ Altendorf F45 Panel Saw3.2 Metreinc duplex digi stop fence. Good working order and clean condition. Year 2004.Transport available. Phone number ✆ 01609 488726 Grosmont, North Yorkshire

  • Section Shear Punch Mubea Muhr Bender KLSH 550

    TOOLS Kirkby Grindalythe (North Yorkshire) May 11, 2024 2400.00 £

    Section Shear Punch Mubea Muhr Bender KLSH 550 ⭕ Section Shear punch Mubea Muhr und Bender KLSH 550 Good working confition 55 t Punching capacity, holes diameter 30 in 15 mm, 50 mm cutting stroke. Shearing flat bar 200 x 20 mm or 400 x 16 mm, Klink p...

  • BPR C 403 ME1 Profile Bender

    TOOLS Leyburn (North Yorkshire) May 11, 2024 2500.00 £

    BPR C 403 ME1 Profile Bender ⭕ BPR C 403 ME1 Profile Bender Year 2005 Clean condition Good working order Sheet thickness (mm) Shaft = 40 Bending length (mm) Roll = 152 Number of rolls 3 rolls including set extra rolls May consider delivery. Phone num...

  • WAVE BIOTECH BIOREACTOR SYSTEM

    TOOLS Kildwick (North Yorkshire) May 10, 2024 2400.00 £

    WAVE BIOTECH BIOREACTOR SYSTEM ⭕ WAVE BIOTECH BIOREACTOR SYSTEM 20/50EHT MODEL BASE20/50EHTD-L SINGLE AND DUAL BAG CONFIGURATION AND PERFUSION OPTION FERMENTOR - FERMENTER - CELL CULTURE COMPLETE SYSTEM - IT INCLUDES: MAIN BIOREACTOR BASE20/50EHTD-L ...

  • Richmond Hearald Radial Arm Drill

    TOOLS Kildwick (North Yorkshire) May 10, 2024 1800.00 £

    Richmond Hearald Radial Arm Drill ⭕ Richmond Hearald Radial Arm Drill with a high spec to include the following: 4HP Main Motor 4MTR Spindle 40 Arm Power up and down Tapping feature 500 x 400 x 500 box cube Speed range 50-2000 rpm Coolant, Light, Ins...

  • Mubea KLH 500610 Bender

    TOOLS Dunsley (North Yorkshire) May 10, 2024 2280.00 £

    Mubea KLH 500610 Bender ⭕ Hydraulic punch Manufacturer: Muhr Bender Type: KLH 500/610, Year 2003, Capacity: 500KN Stroke adjustable 0-60 mm Working speed: 16-47 1 / min perforation: to 30mm diameter with 15mm steel up to 100mm diameter at 4, 5mm stee...

  • Micro Vu Sol

    TOOLS Kirkby Overblow (North Yorkshire) May 10, 2024 2600.00 £

    Micro Vu Sol ⭕ This Micro Vu Sol Measurement System was bought new about 9 months ago. It was calibrated and used lightly. Like brand new. Can help with delivery/pickup. Original owner and as you can see the unit is in excellent condition and is full...

  • BROOKS ROBOT 121655 KLA

    TOOLS Kirkbymoorside (North Yorkshire) May 10, 2024 3500.00 £

    BROOKS ROBOT 121655 KLA ⭕ BROOKS ROBOT 121655 KLA:750-614718-000 AB CONTROLLER 105947 KLA:750-614717-000 AA ALIGNER 002-7391-08 KLA:750-614710-000 AB DN MODULE 108378 CABLES EXCELLENT CONDITION EQUIPMENT IS UNDER 3 YEARS OLD SHIPPING CAN BE ARRANGED ...

  • Molecular Devices SpectraMax Plus 384 Plate Reader

    TOOLS South Milford (North Yorkshire) May 9, 2024 2000.00 £

    Molecular Devices SpectraMax Plus 384 Plate Reader ⭕ Molecular Devices SpectraMax Plus 384 Plate Reader in perfect working order and clean cosmetic condition. In case of unhappy with the purchase, returns accepted within 30days and available for ship...

  • Wask 2 Way Bag Set

    TOOLS Scarborough (North Yorkshire) May 9, 2024 2780.00 £

    Wask 2 Way Bag Set ⭕ Genuine Wask 2 Way Bag Set. Local pickup/delivery available. Set includes. 4 X Base 4 X Canopy 4 X Night caps 4 X Bag tubes 4 X Head works 4 X Chain set 4 X 3-4 Noses 4 X 6/150mm Noses 4 X 8/200mm Noses 4 X 10/250mm Noses 4 X 12/...

  • Rofin Sinar Oem10ix 10.6LP 100W CO2

    TOOLS Ripley (North Yorkshire) May 9, 2024 2650.00 £

    Rofin Sinar Oem10ix 10.6LP 100W CO2 ⭕ rofin sinar oem10ix 10.6LP 100W CO2 Laser with RSDC1096 Laser Power Supply Perfect working condition 30 days return policy Available for delivery Phone number ✆ 07553 659325 Ripley, North Yorkshire

  • ESAB ESP-150 PLASMA CUTTER WATER COOLED

    TOOLS Hawes (North Yorkshire) May 8, 2024 2700.00 £

    ESAB ESP-150 PLASMA CUTTER WATER COOLED ⭕ ESAB ESP-150 PLASMA CUTTER - MACHINE IS IN EXCELLENT CONDITION, FULLY WORKING ORDER AND VERY CLEAN - NEW TORCH - RUNNING GEAR KIT (WHEELS, CART, WITH BOTTLE RACK) - OPTIONAL ACCESSORIES - INSTALLED! ONLY 4 YE...

  • Calibrated Olympus MX Phased Detector

    TOOLS Malton (North Yorkshire) May 8, 2024 3000.00 £

    Calibrated Olympus MX Phased Detector ⭕ Calibrated Olympus MX Phased Array Flaw Detector with 32:128 Module in perfect working condition and excellent cosmetic shape. Unit is less than 2 years old. Includes AC Adapter, 1 battery, 1 extra battery, bat...

  • CASOLIN ASTRA DGT PF Sliding Table Saw

    TOOLS Kildwick (North Yorkshire) May 8, 2024 2650.00 £

    CASOLIN ASTRA DGT PF Sliding Table Saw ⭕ CASOLIN ASTRA DGT PF Sliding table saw CASOLIN ASTRA DGT PF PANEL SAW TRUCK ALUMINUM ANODIZING FROM 3.200 MM CUT. MOTOR 5,5 HP MOTOR 1 CV SCORING GROUP STARTER STAR DELTA AUTOMATIC CUT REAR TABLE WITH PARALLEL...

  • Concrete Block Molds

    TOOLS Gisborough (North Yorkshire) May 8, 2024 1.00 £

    Concrete Block Molds ⭕ Portable light weight forms are ideal for leftover concrete recovery on the jobsite or the DIY. For more info visit; www.formablok.com Phone number ✆ 01609 622398 Gisborough, North Yorkshire

  • AMS Green Light HPS Mojo 400kj Surgical System

    TOOLS Settle (North Yorkshire) May 7, 2024 2620.00 £

    AMS Green Light HPS Mojo 400kj Surgical System ⭕ AMS Green Light HPS Mojo 400kj Surgical Laser System in like new conditions. Approximately 14 months old. Compared to other lasers, GreenLights 532 nm wavelength is highly selectively absorbed in tissu...

  • Husqvarna FS6600 Concrete Saw

    TOOLS Hunmanby (North Yorkshire) May 7, 2024 2900.00 £

    Husqvarna FS6600 Concrete Saw ⭕ Hours 88 Blade Diameter-36 Model FS6600 Year 2013 John Deere Engine 2.4L Displacement Power 2800 RPM L x W x H: 60 x 36x 56 inch Transport available. Phone number ✆ 01423 955666 Hunmanby, North Yorkshire

  • Biotage TurboVap II Evaporator

    TOOLS Helmsley (North Yorkshire) May 7, 2024 2380.00 £

    Biotage TurboVap II Evaporator ⭕ Biotage TurboVap II Sample Evaporator in excellent cosmetic condition. Evertyhing works as it should. Unit is less than 17 months old. Includes 6 tube auxiliary rack; Quantity of 18, 200 mL evaporator tubes with 1 mL ...

  • Wadkin BEX Spindle Moulder

    TOOLS Selby (North Yorkshire) May 7, 2024 1780.00 £

    Wadkin BEX Spindle Moulder ⭕ Wadkin BEX Spindle Moulder 30mm Shaft and collars Table size 750mm x 1200mm Spindle speeds - 1500, 3000, 4500, 6000, 8000 RPM Adjustable fence hood assembly 5.5 hp motor Braked 3 roller power feed fitted Delivery possible...

  • AMI, Arc Machines Orbital Tube Welder, Model 207-A

    TOOLS Teesside (North Yorkshire) May 7, 2024 3000.00 £

    AMI, Arc Machines Orbital Tube Welder, Model 207-A ⭕ AMI, Arc Machines Orbital Tube Welder, Model 207-A In clean and good working condition. Shipping or local pick-up and comes with a 30 day right of return should it not perform to your expectations....

  • CAJON Orbital Welder

    TOOLS Hawnby (North Yorkshire) May 7, 2024 3000.00 £

    CAJON Orbital Welder ⭕ This is a complete CAJON orbital welding system. This sale includes; CAJON controller, #5 head, #10 head, fixture blocks for #5 and #10 heads, air regulator and gauges, argon regulator and gauges (no tank), purge hose on spool ...

  • Felder K 700 Clean Condition

    TOOLS Bolton Abbey (North Yorkshire) May 6, 2024 3400.00 £

    Felder K 700 Clean Condition ⭕ The new Felder K 700 is quite simply in a class of its own: Solid construction and intuitive solutions for woodworkers with high demands. With intelligent new features and technologically unique solutions, the Felder K ...

  • SANTINELLI LE 9000 SX EDGER WITH LOW CUTS

    TOOLS Kirkbymoorside (North Yorkshire) May 6, 2024 2600.00 £

    SANTINELLI LE 9000 SX EDGER WITH LOW CUTS ⭕ SANTINELLI LE 9000 SX EDGER with NIDEK CE-1 BLOCKER YEAR 2013 ONLY 1808 CUTS INCLUDES TWO PUMPS AND FILTER CLEAN CONDITION, GOOD WORKING ORDER CAN HELP WITH DELIVERY OR LOCAL PICKUP. Phone number ✆ 01423 72...

  • RFG 5500 Advanced Energy AE RFG5500

    TOOLS West Witton (North Yorkshire) May 5, 2024 3200.00 £

    RFG 5500 Advanced Energy AE RFG5500 ⭕ Advanced Energy AE RFG 5500 P/N: R27-115617-00 Working condition Collection/shipping Phone number ✆ 01423 426738 West Witton, North Yorkshire

  • LDS AIR COOLED VIBRATER Electro Dynamic Shaker System - Tools - By Dealer

    TOOLS Northallerton (North Yorkshire) May 5, 2024 5500.00 £

    LDS AIR COOLED VIBRATER Electro Dynamic Shaker System - Tools - By Dealer ⭕ LDS AIR COOLED VIBRATER Electro Dynamic Shaker System LDS V830335 TRUNNION FROM GENERAL DYNAMICS This unit has been regularly maintained, was bought in 2008. Can deliver. Pho...

  • Storz Autocon II 2 400 SCB

    TOOLS Drax (North Yorkshire) May 4, 2024 3000.00 £

    Storz Autocon II 2 400 SCB ⭕ Storz Autocon II Autocon 2 400 SCB High Frequency Electrosurgical Unit ESU with remaining warranty from manufacturer. This unit is in perfect condition and shipping available plus it comes with 30days return policy. Less ...

  • Messer Hypertherm HD3070 CNC Cutter

    TOOLS Gisborough (North Yorkshire) May 4, 2024 3990.00 £

    Messer Hypertherm HD3070 CNC Cutter ⭕ Messer CNC plasma cutter. Power source is a Hypertherm HD3070. Complete with 6m x 2m extraction table. CNC controller is a Burny 3. Capacity 6m x 3m x16mm in ferrous and non ferrous metals. Manufactured in 2008. ...

  • Roland Mdx 40 Cnc Milling

    TOOLS Hawnby (North Yorkshire) May 4, 2024 2050.00 £

    Roland Mdx 40 Cnc Milling ⭕ Roland MDX 40 cnc milling machine in perfect working order and complete with software and cables. Less than 16 months old. Single owner. Delivery available or pickup local. Phone number ✆ 07911 237496 Hawnby, North Yorkshi...