EZ50 Stringing Gun - Cable Feeding Tool
- 1.00 £
- Published date: March 4, 2024
-
- Studley, Warwickshire, United Kingdom
EZ50 Stringing Gun - Cable Feeding Tool
⭕ The Stringing Gun EZ50 by Zeitler is used to feed a special pull line promptly and efficiently into conduits of Ø 18 to 50 mm (internal diameter) for electrical installation in private construction.
Easy to apply even in buckled conduits, junction boxes, sockets and plugs.
The simple way to blow or suck pull line.
Facts
• Blow or suck pull line without compressor
• For all commercial pipe work
(internal diameter from 18 to 50 mm)
• Appropriate for flexible conduits
• Installations in the range of private,
office and industrial buildings
• Huge time saving in cable feeding
• Feeding of several hundred meters
• Lightweight and compact
• Excellent accessibility, even in confined spaces
• Easy to handle
• Double function (blowing and suction mode)
• Perfect and strong to solve pull line
feeding problems
• Suitable in any car boot
• Perfect value for money
Zeitler AG
Stringing Guns and Cable feeding Tools
Sonnhalde 7
CH-6206 Neuenkirch/Switzerland
Tel. +41 (0)41 467 16 14
Fax +41 (0)41 467 20 35
www.zeitler.ch
Stringing Gun EZ50
for all electrical installations
Intended Use:
• insert a special pull line in all commercial conduits (int. ø 18 to 50 mm)
• installations in the range of private houses, office and industrial buildings
• for all commercial boxes, junction boxes, sockets, lamp boxes etc.
(even in very confined spaces)
• problems with f.e. kinked conduits can be solved by switching to suction mode,
sucking the pull line from opposite end
Function:
• apply line brake
• fit joint/nozzle appropriate to internal conduit diameter
• firstly blow through the conduit with air, check if penetrable tube/correct tube
• make either a loop or fix a bead to the pull line
• release line brake
• blow pull line in without interrupting, observe uncoiling in cylinder
• release switch and close nozzle with a finger
• apply line brake and cut off pull line
• fix wire/s to the pull line and start pulling
Stringing Gun EZ50
Standard equipment in strong plastic case
• 1 Stringing Gun EZ50
• 2 pull line rolls ø 1 mm, approx. 900 m, tensile strength approx. 24 kg
• 1 suction device
• Components set A: 2 joints ½, reduction 19/12 mm and nozzle int. ø 9,5 mm
• Components set B: 3 joints ¾, nozzle int. ø 16 mm plus nozzle int. ø 19 mm
• 1 special nozzle black, for internal diameter from 25 to 50 mm
• 1 special nozzle with 90° angle, external diameter 12 mm
(only in connection with special nozzle black)
• 3 beads of ø 11, 13 and 16 mm each
• Operating instructions
https://www.youtube.com/watch?v=dRyEW355ZHk
Easy to apply even in buckled conduits, junction boxes, sockets and plugs.
The simple way to blow or suck pull line.
Facts
• Blow or suck pull line without compressor
• For all commercial pipe work
(internal diameter from 18 to 50 mm)
• Appropriate for flexible conduits
• Installations in the range of private,
office and industrial buildings
• Huge time saving in cable feeding
• Feeding of several hundred meters
• Lightweight and compact
• Excellent accessibility, even in confined spaces
• Easy to handle
• Double function (blowing and suction mode)
• Perfect and strong to solve pull line
feeding problems
• Suitable in any car boot
• Perfect value for money
Zeitler AG
Stringing Guns and Cable feeding Tools
Sonnhalde 7
CH-6206 Neuenkirch/Switzerland
Tel. +41 (0)41 467 16 14
Fax +41 (0)41 467 20 35
www.zeitler.ch
Stringing Gun EZ50
for all electrical installations
Intended Use:
• insert a special pull line in all commercial conduits (int. ø 18 to 50 mm)
• installations in the range of private houses, office and industrial buildings
• for all commercial boxes, junction boxes, sockets, lamp boxes etc.
(even in very confined spaces)
• problems with f.e. kinked conduits can be solved by switching to suction mode,
sucking the pull line from opposite end
Function:
• apply line brake
• fit joint/nozzle appropriate to internal conduit diameter
• firstly blow through the conduit with air, check if penetrable tube/correct tube
• make either a loop or fix a bead to the pull line
• release line brake
• blow pull line in without interrupting, observe uncoiling in cylinder
• release switch and close nozzle with a finger
• apply line brake and cut off pull line
• fix wire/s to the pull line and start pulling
Stringing Gun EZ50
Standard equipment in strong plastic case
• 1 Stringing Gun EZ50
• 2 pull line rolls ø 1 mm, approx. 900 m, tensile strength approx. 24 kg
• 1 suction device
• Components set A: 2 joints ½, reduction 19/12 mm and nozzle int. ø 9,5 mm
• Components set B: 3 joints ¾, nozzle int. ø 16 mm plus nozzle int. ø 19 mm
• 1 special nozzle black, for internal diameter from 25 to 50 mm
• 1 special nozzle with 90° angle, external diameter 12 mm
(only in connection with special nozzle black)
• 3 beads of ø 11, 13 and 16 mm each
• Operating instructions
https://www.youtube.com/watch?v=dRyEW355ZHk
Phone number ✆ 01789 219622
Studley, Warwickshire
Related listings
-
-
Kaelus IQA-0850C PIM Analyzer WITH KAELU...
TOOLS Lea Marston (Warwickshire) March 10, 2024 2750.00 £ -
-
-
Bruker Avance 300 MHZ NMR System Spectro...
TOOLS Marlow-on-Thames (Warwickshire) March 8, 2024 3700.00 £ -
-
Thermo Scientific MIRAN Sapphire 205B-XL
TOOLS Leamington Spa (Warwickshire) March 6, 2024 1960.00 £ -
-
-
Seiko Instruments SII OFL-153 Mass Fiber...
TOOLS Lea Marston (Warwickshire) March 2, 2024 2650.00 £ -
-
-
Torrington 100F-9830 Harrington MS100F-1...
TOOLS Kingsbury (Warwickshire) February 27, 2024 1780.00 £ -
2011 GE Voluson I Portable 3D 4D Ultraso...
TOOLS Shipston on Stour (Warwickshire) February 25, 2024 4500.00 £ -
-
-
Exakt Technologies 3 Three Roll Mill Mod...
TOOLS Alderminster (Warwickshire) February 15, 2024 3500.00 £ -
-
Well Diamond Wire Saw Model 3241 (Walter...
TOOLS Bulkington (Warwickshire) February 13, 2024 3000.00 £ -
-
-
-
Sterrad 100S Sterilizer Jhonson And Jhon...
TOOLS Cosford (Warwickshire) February 10, 2024 2700.00 £ -
-
-
-
Thomas Betts Battpac Tbm14bscr Hydraulic...
TOOLS Nuneaton (Warwickshire) February 7, 2024 2750.00 £
-
-
-
Houfek Bulldog SPB 910C Wide Belt Sander
TOOLS Lea Marston (Warwickshire) January 29, 2024 2750.00 £