QHD-15030 ADIRA 10' X 168 Ton Downacting Hydraulic Press Brake - General For Sale - By Owner
- 9999.00 £
- Published date: March 21, 2024
-
- Chardstock, Devon, United Kingdom
QHD-15030 ADIRA 10' X 168 Ton Downacting Hydraulic Press Brake - General For Sale - By Owner
⭕ Preowned 10 x 168 Ton ADIRA Downacting Hydraulic Press Brake, Model: QHD-15030,
S/N: 6606/11006 (New 2002)
Tonnage
Maximum bending length
Distance between housings
Maximum/Minimum stroke length
Maximum open height without any tooling
Maximum shut height without any tooling
Throat depth (gap)
Bed top width
Approach speed
Bending speed
Return speed
R-axis travel
168 ton
120.1
100.4
6.3/.59
15.7
9.4
15.7
7.7
188.9 I.P.M.
16.06 I.P.M.
186 I.P.M.
7.87
Equipped with:
#DNC-1200 CYBELEC Window based three-axis CNC control with display mounted
in swing-arm pendant. Tonnage, Dwell Time, Back Gauge Control, and Bending
Depth in both automatic and manual modes are all controlled through the CYBELEC
controller. The control has both floppy and CD drives as well as a keyboard port.
25 Capacity two-axis CNC back gauge (X & R axes) with 7.87 of vertical travel
and (4) adjustable fingers
Operators control station with a double (Down/Up) foot switch
Full complement of upper punch holders
Single Stroke/Manual Return, Single Stroke/Automatic Return, and Inch modes of
operation via key-lock selector switch
Pressure gauge
Dovetail slots at front and rear of lower beam table
12 H.P. 3/60/220-440 volt hydraulic pump motor and electrical controls
Machine is wired for 220 volt operation.
S/N: 6606/11006 (New 2002)
Tonnage
Maximum bending length
Distance between housings
Maximum/Minimum stroke length
Maximum open height without any tooling
Maximum shut height without any tooling
Throat depth (gap)
Bed top width
Approach speed
Bending speed
Return speed
R-axis travel
168 ton
120.1
100.4
6.3/.59
15.7
9.4
15.7
7.7
188.9 I.P.M.
16.06 I.P.M.
186 I.P.M.
7.87
Equipped with:
#DNC-1200 CYBELEC Window based three-axis CNC control with display mounted
in swing-arm pendant. Tonnage, Dwell Time, Back Gauge Control, and Bending
Depth in both automatic and manual modes are all controlled through the CYBELEC
controller. The control has both floppy and CD drives as well as a keyboard port.
25 Capacity two-axis CNC back gauge (X & R axes) with 7.87 of vertical travel
and (4) adjustable fingers
Operators control station with a double (Down/Up) foot switch
Full complement of upper punch holders
Single Stroke/Manual Return, Single Stroke/Automatic Return, and Inch modes of
operation via key-lock selector switch
Pressure gauge
Dovetail slots at front and rear of lower beam table
12 H.P. 3/60/220-440 volt hydraulic pump motor and electrical controls
Machine is wired for 220 volt operation.
Phone number ✆ 07911 274443
Chardstock, Devon
Related listings
-
-
-
Solartron Analytical 1252A Frequency Res...
GENERAL Churston Ferrers (Devon) April 23, 2024 2700.00 £
-
1936 OLD WALTER TEAGUE SPARTON BLUE MIRR...
GENERAL Churston Ferrers (Devon) April 15, 2024 1500.00 £ -
-
-
-
-
MSD Meso Scale Discovery 1250 Sector Ima...
GENERAL Moretonhampstead (Devon) April 8, 2024 2700.00 £