9 Cylinder Radial Engine Model - 130cc
- 1500.00 £
- Published date: March 31, 2024
-
- Bolton Abbey, North Yorkshire, United Kingdom
9 Cylinder Radial Engine Model - 130cc
⭕ This is my recently completed model 9-cylinder radial engine to a design by Lee Hodgson. I am offering this model for sale as I have since completed a second similar model to the same design.
This model is constructed mainly of aluminum, steel, stainless steel and bronze, and took well over 1000 hours to build.
The cylinders are 1 bore x 1.25 stroke, giving a total displacement of approximately 130 cc. The pushrods are open, operating two overhead valves per cylinder. Pressure lubrication to the crankshaft bearings and cam drive gearing is by crankshaft driven gear type pressure and scavenge pumps, the oil recirculating from the dry sump back to the combined oil/fuel tank. There are two compression rings and one oil control ring per cylinder. The valve operating cam is hardened steel. The majority of the fasteners are stainless steel.
Ignition is electronic, powered by a 4-AA cell rechargeable battery pack. (Charger included).
The engine uses regular gasoline.
A 24 long cooling club is fitted to provide the necessary cooling airflow to the air-cooled cylinders.
Overall dimensions are 18 long x 15 wide x 14 high, and the weight is approximately 21 lbs.
The engine has had only a relatively short time running, and the performance will improve as the running-in process progresses.
Radial engines tend to be rather oily, and oil may settle into the two lower cylinders after running, requiring the removal of the spark plugs in these two cylinders to enable any collected oil to drain before turning the engine over again, to avoid possible damage to the engine due to hydraulic lock.
As the buyers use of this model is completely beyond the control of the seller, the buyer most assume all responsibility for its use. It is not intended for any purpose other than as a working model.
This model is constructed mainly of aluminum, steel, stainless steel and bronze, and took well over 1000 hours to build.
The cylinders are 1 bore x 1.25 stroke, giving a total displacement of approximately 130 cc. The pushrods are open, operating two overhead valves per cylinder. Pressure lubrication to the crankshaft bearings and cam drive gearing is by crankshaft driven gear type pressure and scavenge pumps, the oil recirculating from the dry sump back to the combined oil/fuel tank. There are two compression rings and one oil control ring per cylinder. The valve operating cam is hardened steel. The majority of the fasteners are stainless steel.
Ignition is electronic, powered by a 4-AA cell rechargeable battery pack. (Charger included).
The engine uses regular gasoline.
A 24 long cooling club is fitted to provide the necessary cooling airflow to the air-cooled cylinders.
Overall dimensions are 18 long x 15 wide x 14 high, and the weight is approximately 21 lbs.
The engine has had only a relatively short time running, and the performance will improve as the running-in process progresses.
Radial engines tend to be rather oily, and oil may settle into the two lower cylinders after running, requiring the removal of the spark plugs in these two cylinders to enable any collected oil to drain before turning the engine over again, to avoid possible damage to the engine due to hydraulic lock.
As the buyers use of this model is completely beyond the control of the seller, the buyer most assume all responsibility for its use. It is not intended for any purpose other than as a working model.
Phone number ✆ 01723 944852
Bolton Abbey, North Yorkshire
Related listings
-
-
Tractor Massey Fergusson 1957/ Tractor G...
GENERAL Northallerton (North Yorkshire) April 26, 2024 2700.00 £ -
-
BYK Gardner 4816 Wave-Scan DOI Orange-Pe...
GENERAL Easington Lane (North Yorkshire) April 23, 2024 1900.00 £ -
-
-
-
-
Z Corp 3D Model Maker Z310 Plus Printer ...
GENERAL Wilton (North Yorkshire) April 22, 2024 2750.00 £
-
Weed Herbs Dutch Amnesia And UK Lemon Ha...
GENERAL Hackness (North Yorkshire) April 18, 2024 20.00 £ -
-
-
-
-
KARL STORZ ROTOCUT G1 UNIVERSAL LAPAROSC...
GENERAL Hackness (North Yorkshire) April 14, 2024 2400.00 £
-
-
-
Super Silver Haze, Amnesia Ganja, Buds
GENERAL Kirkby Mills (North Yorkshire) April 13, 2024 20.00 £
-
-
MIKES WHITE & GREEN DELIVERY Or COLLECTI...
GENERAL Guisborough (North Yorkshire) April 12, 2024 20.00 £ -
Leica INM20 Trinocular Microscope 5 Obje...
GENERAL Dunsley (North Yorkshire) April 12, 2024 2350.00 £
-
-
-
Driving Licences, Penalty Points Wiped
GENERAL Kirkby Mills (North Yorkshire) April 10, 2024 300.00 £
-
Exotic Flowers For Sale@!! Lots Of Types...
GENERAL Castleton (North Yorkshire) April 10, 2024 20.00 £ -
-
-
Bio-Rad DNA Engine Tetrad 2 Peltier Ther...
GENERAL Whitby (North Yorkshire) April 9, 2024 3050.00 £ -
COHERENT VersaPulse Select Holmium YAG
GENERAL Northallerton (North Yorkshire) April 9, 2024 3000.00 £ -
Metcal BGA/CSP Split Vision Rework Syste...
GENERAL Middleham (North Yorkshire) April 9, 2024 2600.00 £
-
S-TEC 55 Autopilot W/Flight Director & T...
GENERAL Tadcaster (North Yorkshire) April 8, 2024 2300.00 £ -
-
-
1957 Thunderbird E-Bird Y-Block 312 Dual...
GENERAL Rosedale Abbey (North Yorkshire) April 6, 2024 1300.00 £ -
-
-
Used Boxers, Used Socks, Used Condoms Fo...
GENERAL West Witton (North Yorkshire) April 6, 2024 1.00 £ -
-
-
420 WEED SKUNK BUDS CANNABIS AMNESIA HAZ...
GENERAL Leeming Bar (North Yorkshire) April 5, 2024 20.00 £ -
-
-
-
HEUER RALLY-MASTER (MASTER TIME / MONTE ...
GENERAL Kildwick (North Yorkshire) April 4, 2024 2500.00 £ -
250HP Motor D250P3C-P 460V 1200RPM 449T ...
GENERAL Malham (North Yorkshire) April 2, 2024 3400.00 £
-
-
Mobile Stage Structure Business Portable...
GENERAL Rosedale Abbey (North Yorkshire) April 2, 2024 4000.00 £ -
-
-
!£!QUALITY RSO THC90%, WAX, SHATTERS, HA...
GENERAL Grosmont (North Yorkshire) April 1, 2024 100.00 £ -
HIAB CRANE 12 VOLT 3500KG SUITABLE
GENERAL North Yorkshire (North Yorkshire) April 1, 2024 1500.00 £