⭕ This is a fully rebuilt lotus twin cam engine using a 711 M tall block taken from a 1.6 Mexico blue printed engine. I was going to build a lotus Cortina using this engine but ended up buying a complete car that im using now. So I do not need this engine any more. The block was decked to suite Lotus pistons and a front spacer is used on top of the timing cover turning an overhead valve engine into an overhead cam engine. Fitted with a rear bowl sump, a front bowl sump can befitted if that application is needed. The cylinder head has been ported and fitted with new valve guides,new stainless steels valves and re-shimmed. SE cams with a single band. Reground crankshaft square main and end caps six bolt flywheel. Rebord to + 20. mains and ends are + 10 new timing chain guide and tensioner. New water pump new water pump pulley flange.complete new gaskets. Oil pump fuel pump and distributor all timed up and ready to be started. This engine has never been run .


Specifications

•711 M block (tall block)
•Lotus pistons +20 new rebore
•Stainless steel valves
•Inlet valve 1.565 head diameter. 3.915 length. 0.310 stem diameter.
•Exhaust valve 1.33 head diameter. 3.850 length. 0.310 stem diameter.
•Reground crankshaft mains +10 ends +10
•New thrust washers
•New valve springs
•New collets
•New timing chain
•New timing chain guides
•Complete new gasket set
•distributor cap and leads
•fuel pump
•oil pump
•new water pump