EZ50 Stringing Gun - Cable Feeding Tool
- 1.00 £
- Published date: March 12, 2024
-
- Nottingham, Nottinghamshire, United Kingdom
EZ50 Stringing Gun - Cable Feeding Tool
⭕ The Stringing Gun EZ50 by Zeitler is used to feed a special pull line promptly and efficiently into conduits of Ø 18 to 50 mm (internal diameter) for electrical installation in private construction.
Easy to apply even in buckled conduits, junction boxes, sockets and plugs.
The simple way to blow or suck pull line.
Facts
• Blow or suck pull line without compressor
• For all commercial pipe work
(internal diameter from 18 to 50 mm)
• Appropriate for flexible conduits
• Installations in the range of private,
office and industrial buildings
• Huge time saving in cable feeding
• Feeding of several hundred meters
• Lightweight and compact
• Excellent accessibility, even in confined spaces
• Easy to handle
• Double function (blowing and suction mode)
• Perfect and strong to solve pull line
feeding problems
• Suitable in any car boot
• Perfect value for money
Zeitler AG
Stringing Guns and Cable feeding Tools
Sonnhalde 7
CH-6206 Neuenkirch/Switzerland
Tel. +41 (0)41 467 16 14
Fax +41 (0)41 467 20 35
www.zeitler.ch
Stringing Gun EZ50
for all electrical installations
Intended Use:
• insert a special pull line in all commercial conduits (int. ø 18 to 50 mm)
• installations in the range of private houses, office and industrial buildings
• for all commercial boxes, junction boxes, sockets, lamp boxes etc.
(even in very confined spaces)
• problems with f.e. kinked conduits can be solved by switching to suction mode,
sucking the pull line from opposite end
Function:
• apply line brake
• fit joint/nozzle appropriate to internal conduit diameter
• firstly blow through the conduit with air, check if penetrable tube/correct tube
• make either a loop or fix a bead to the pull line
• release line brake
• blow pull line in without interrupting, observe uncoiling in cylinder
• release switch and close nozzle with a finger
• apply line brake and cut off pull line
• fix wire/s to the pull line and start pulling
Stringing Gun EZ50
Standard equipment in strong plastic case
• 1 Stringing Gun EZ50
• 2 pull line rolls ø 1 mm, approx. 900 m, tensile strength approx. 24 kg
• 1 suction device
• Components set A: 2 joints ½, reduction 19/12 mm and nozzle int. ø 9,5 mm
• Components set B: 3 joints ¾, nozzle int. ø 16 mm plus nozzle int. ø 19 mm
• 1 special nozzle black, for internal diameter from 25 to 50 mm
• 1 special nozzle with 90° angle, external diameter 12 mm
(only in connection with special nozzle black)
• 3 beads of ø 11, 13 and 16 mm each
• Operating instructions
https://www.youtube.com/watch?v=dRyEW355ZHk
Easy to apply even in buckled conduits, junction boxes, sockets and plugs.
The simple way to blow or suck pull line.
Facts
• Blow or suck pull line without compressor
• For all commercial pipe work
(internal diameter from 18 to 50 mm)
• Appropriate for flexible conduits
• Installations in the range of private,
office and industrial buildings
• Huge time saving in cable feeding
• Feeding of several hundred meters
• Lightweight and compact
• Excellent accessibility, even in confined spaces
• Easy to handle
• Double function (blowing and suction mode)
• Perfect and strong to solve pull line
feeding problems
• Suitable in any car boot
• Perfect value for money
Zeitler AG
Stringing Guns and Cable feeding Tools
Sonnhalde 7
CH-6206 Neuenkirch/Switzerland
Tel. +41 (0)41 467 16 14
Fax +41 (0)41 467 20 35
www.zeitler.ch
Stringing Gun EZ50
for all electrical installations
Intended Use:
• insert a special pull line in all commercial conduits (int. ø 18 to 50 mm)
• installations in the range of private houses, office and industrial buildings
• for all commercial boxes, junction boxes, sockets, lamp boxes etc.
(even in very confined spaces)
• problems with f.e. kinked conduits can be solved by switching to suction mode,
sucking the pull line from opposite end
Function:
• apply line brake
• fit joint/nozzle appropriate to internal conduit diameter
• firstly blow through the conduit with air, check if penetrable tube/correct tube
• make either a loop or fix a bead to the pull line
• release line brake
• blow pull line in without interrupting, observe uncoiling in cylinder
• release switch and close nozzle with a finger
• apply line brake and cut off pull line
• fix wire/s to the pull line and start pulling
Stringing Gun EZ50
Standard equipment in strong plastic case
• 1 Stringing Gun EZ50
• 2 pull line rolls ø 1 mm, approx. 900 m, tensile strength approx. 24 kg
• 1 suction device
• Components set A: 2 joints ½, reduction 19/12 mm and nozzle int. ø 9,5 mm
• Components set B: 3 joints ¾, nozzle int. ø 16 mm plus nozzle int. ø 19 mm
• 1 special nozzle black, for internal diameter from 25 to 50 mm
• 1 special nozzle with 90° angle, external diameter 12 mm
(only in connection with special nozzle black)
• 3 beads of ø 11, 13 and 16 mm each
• Operating instructions
https://www.youtube.com/watch?v=dRyEW355ZHk
Phone number ✆ 07727 433655
Nottingham, Nottinghamshire
Related listings
-
-
ELDIM MURATest MURA 2211 - Tools - By De...
TOOLS Wimborne Minster (Dorset) April 17, 2024 2350.00 £ -
-
-
Epilog Helix 60 Watt Engraver Engraving ...
TOOLS Robertsbridge (East Sussex) April 14, 2024 2900.00 £ -
-
-
-
SCREEN PRINTING ROTATIVE PRESS 4 COLORS ...
TOOLS Sawbridgeworth (Hertfordshire) April 14, 2024 1065.00 £
-
-
-
Profile Bending Profiles Bender BPR C 40...
TOOLS Kirkby Overblow (North Yorkshire) April 13, 2024 2000.00 £
-
Agilent E4440A 26.5GHz Spectrum Analyzer
TOOLS Wellingborough (Northamptonshire) April 13, 2024 2500.00 £ -
-
New AE Advanced Energy PE II 10k Power S...
TOOLS Cleckheaton (West Yorkshire) April 12, 2024 3100.00 £
-
Carl Zeiss FF 450 IR Mydriatic Retinal F...
TOOLS Widecombe in the Moor (Devon) April 11, 2024 2850.00 £ -
-
-
CHARMILLES ROBOFIL 690 WIRE EDM SODICK A...
TOOLS Snowshill (Gloucestershire) April 11, 2024 18500.00 £ -
-
-
-
-
Griggio T220 Spindle Moulder - Tools - B...
TOOLS Guisborough (North Yorkshire) April 10, 2024 2250.00 £
-
Everest VIT PXLM430 VideoProbe Borescope...
TOOLS Wrightington (Lancashire) April 10, 2024 2600.00 £ -
-