GLADIATOR Commercial Diving Helmet
- 1550.00 £
- Published date: March 3, 2024
-
- Glasgow, Scotland, United Kingdom
GLADIATOR Commercial Diving Helmet
⭕ This is AS NEW and in perfect condition! NEVER been in sea water!
The GLADIATOR diving helmet is based on a cast bronze shell approximately 3/16-1/4 thick and is tested for structural integrity.
Special ordered with side exhaust.
Weight: 29.5lbs
Face Port: Lexan 3/8
Free Flow Valve: Parker-3000PSI-WP
Check Valve: Swagelok-3000PSI-WP
Comms: Brass CommPosts - 8ohm speakers/mike
Poseidon - Xstream regulator
Approved to depth for Scuba - 200msw / 656fsw
Approvals: US Navy tested & approved
NORSOK approved
CE approved
EN738-1 Oxygen approved
CE cold water approved
99.95% Oxygen safe
Materials: Stainless Steel
Brass
O-Rings - Viton / EPDM
Technique: Upstream Servo Control
Auto Venturi Assist
Auto Inhalation Control
Flow Rate: 2150L / 76cfm
Inhalation Resistance: @50msw / 166fsw - 0.02J/L
Total Work of Breathing: @50msw / 166fsw - 1.50J/L
Inlet Pressure: 8.5Bar / 123psi over ambient
Cover plate on lower left is removed to access 1 silicon/rubber flapper valve for oral nasal. Exhaust is ducted to barrel on right.
Helmet shell exhaust valve is at base of barrel. Both helmet shell [1] exhaust and oral/nasal [2] exhausts pass thru flapper valve disk [3] and out thru perforated cover on lower right. All 3 flappers are silicon rubber for
longevity and excellent performance.
The GLADIATOR diving helmet is based on a cast bronze shell approximately 3/16-1/4 thick and is tested for structural integrity.
Special ordered with side exhaust.
Weight: 29.5lbs
Face Port: Lexan 3/8
Free Flow Valve: Parker-3000PSI-WP
Check Valve: Swagelok-3000PSI-WP
Comms: Brass CommPosts - 8ohm speakers/mike
Poseidon - Xstream regulator
Approved to depth for Scuba - 200msw / 656fsw
Approvals: US Navy tested & approved
NORSOK approved
CE approved
EN738-1 Oxygen approved
CE cold water approved
99.95% Oxygen safe
Materials: Stainless Steel
Brass
O-Rings - Viton / EPDM
Technique: Upstream Servo Control
Auto Venturi Assist
Auto Inhalation Control
Flow Rate: 2150L / 76cfm
Inhalation Resistance: @50msw / 166fsw - 0.02J/L
Total Work of Breathing: @50msw / 166fsw - 1.50J/L
Inlet Pressure: 8.5Bar / 123psi over ambient
Cover plate on lower left is removed to access 1 silicon/rubber flapper valve for oral nasal. Exhaust is ducted to barrel on right.
Helmet shell exhaust valve is at base of barrel. Both helmet shell [1] exhaust and oral/nasal [2] exhausts pass thru flapper valve disk [3] and out thru perforated cover on lower right. All 3 flappers are silicon rubber for
longevity and excellent performance.
Phone number ✆ 07730 418060
Glasgow, Scotland
Related listings
-
Bridgeport Milling Machine. Fully Rebuil...
GENERAL Askrigg (North Yorkshire) March 28, 2024 4999.00 £ -
-
-
-
24HR PROVIDING ^^^^^^W 3 3 D ^^^^FOR^^^^...
GENERAL Burnham On Sea (Somerset) March 27, 2024 45.00 £ -
-
PT6A-6A Experimental Engine Ready To Fly
GENERAL Craigavon (Nothern Ireland) March 27, 2024 4700.00 £ -
-
-
Various Items For Sale By Glamour Model ...
GENERAL Leominster (Herefordshire) March 25, 2024 18.00 £ -
-
Four Pillar 100-Ton Hydraulic Press
GENERAL Henley in Arden (West Midlands) March 25, 2024 2900.00 £
-
Stahl T52 Folder SRA2 - General For Sale...
GENERAL Buntingford (Hertfordshire) March 25, 2024 4600.00 £ -
-
-
Idexx Laboratories Idexx-CR 1417 Imaging...
GENERAL Mitcheldean (Gloucestershire) March 25, 2024 3000.00 £ -
-