FELDER COMBINATION WOODWORKING MACHINE BF6-31, SINGLE PHASE

  • 4999.00 £
  • Published date: November 10, 2018
    • Alderley Edge, Cheshire, United Kingdom

FELDER COMBINATION WOODWORKING MACHINE BF6-31, SINGLE PHASE


⭕ IT CONSISTS OF A RIP SAW THAT CAN TAKE A 320MM BLADE, THIS ALSO HAS A SLIDING TABLE THAT RUNS VERY SMOOTHLY ON BEARINGS AND CAN BE CHANGED VERY QUICKLY TO A PANEL SAW THAT WILL TAKE A 8 X 4 SHEET. THIS IS DONE BY ADDING THE LARGE PANEL TABLE AND FENCE TO THE SLIDING TABLE AND TELESCOPIC ARM. SAW BLADE TILTS AS WELL.

A SPINDLE MOULDER AND FULLY ADJUSTABLE FENCE, THE SPINDLE WILL ALSO TILT TO 45 DEGREES, IT WILL ALSO RUN IN REVERSE AT THE SWITCH OF A BUTTON.IT WILL ALSO TAKE TOOLING UP TO 230MM DIA. THE SPINDLE HAS 3 SPEEDS AND THE SPINDLE THAT IS IN IT TAKES 1/14 INCH TOOLING, THIS IS ALL ON A QUICK SPINDLE CHANGE SYSTEM AND SPINDLES CAN BE CHANGED QUICKLY WITH EASE, THERE IS A SPARE SPINDLE WITH THIS WITH COLLETS THAT WILL TAKE 1/4, 3/8, AND 1/2 INCH ROUTER CUTTERS.

FOR THOSE OF YOU WHO HAVE 30MM TOOLING 30MM SPINDLES ARE AVAILABLE FROM FELDER AND USE THE SAME QUICK CHANGE FACILITY.

THE PLANER IS A 12 INCH BY 9 INCH UNDER AND OVER PLANER AND HAS 2 FEED SPEEDS, THE BLOCK HAS 2 DOUBLE SIDED KNIVES THAT ARE SET IN A QUICK PRE SET SYSTEM SO THERE IS NO MESSING ALIGNING PLANER BLADES. THE FINISH ON THIS PLANER IS EXCELLENT.

THE MACHINE IS POWERED BY 3 INDIVIDUAL 2KW MOTORS AND ARE FULLY BRAKED

EXTRAS INCLUDED WITH THIS MACHINE ARE, 500MM EXTENSION TABLE,600 MM EXTENSION BAR THAT CAN BE USED ON THE SAW AND PLANER FENCE, TENNONING TABLE, BIG TABLE FOR PANEL SAW, 1100MM TENNONING SAWING FENCE, 1600MM LONG FENCE FOR PANEL SAW, SPINDLE FOR ROUTER CUTTERS, JOCKEY WHEEL.

THERE ARE SOME CLAMPS, SPARE NEW BELTS, AND A FEW BITS AND BOBS AS WELL

Phone number ✆ 01244 424908
Alderley Edge, Cheshire

Related listings