HPC Laserscript LS2515 1525x2500 150watt Laser Engraving Cutting Machi
- 4400.00 £
- Published date: February 18, 2024
-
- Whitehaven, Cumbria, United Kingdom
HPC Laserscript LS2515 1525x2500 150watt Laser Engraving Cutting Machi
⭕ This sale is for a 3 day old Laserscript LS2515 pro 150watt Laser cutting/engraving machine.
This machines was installed and 3 days later the company had a fire. The laser was up on a mezzanine at the other side of the factory to the fire, but got covered in soot, smoke and steam! Luckily, as it was new all the important bits, like the guild rails, bearings and motor still had there covers on and were covered in travel grease. So all it has needed is a really good clean (and it still looks grubby!) But it works and runs as it should. So if you are looking for a new large format laser and arent worried about appearances then Id serious consider this machine.
The bed size is 1525mm x 2500 mm and overall footprint is 2060 mm x 3040mm. It has 150watt laser fitted.
All ancillaries are included, air pump, water pump and extraction. The software and drivers run on windows up to Windows 8 and connects via USB, all leads included. All you need is a PC or laptop.
I can arrange postage on buyer expensive.
This machines was installed and 3 days later the company had a fire. The laser was up on a mezzanine at the other side of the factory to the fire, but got covered in soot, smoke and steam! Luckily, as it was new all the important bits, like the guild rails, bearings and motor still had there covers on and were covered in travel grease. So all it has needed is a really good clean (and it still looks grubby!) But it works and runs as it should. So if you are looking for a new large format laser and arent worried about appearances then Id serious consider this machine.
The bed size is 1525mm x 2500 mm and overall footprint is 2060 mm x 3040mm. It has 150watt laser fitted.
All ancillaries are included, air pump, water pump and extraction. The software and drivers run on windows up to Windows 8 and connects via USB, all leads included. All you need is a PC or laptop.
I can arrange postage on buyer expensive.
Phone number ✆ 01228 335839
Whitehaven, Cumbria
Related listings
-
-
Miller 301 D Portable Welder Trailblazer...
BUSINESS Hunmanby (North Yorkshire) May 7, 2024 2800.00 £ -
-
-
Covaris S220 Ultrasonicator - Business/c...
BUSINESS Hurst Green (East Sussex) May 6, 2024 2950.00 £ -
1929 LeBlond 60 HP Radial Engine 5 Cylin...
BUSINESS Kirkby Mills (North Yorkshire) May 6, 2024 2500.00 £
-
NEW FANUC LR MATE 200i ROBOT WITH CONTRO...
BUSINESS Saint Owens Cross (Hertfordshire) May 5, 2024 4000.00 £ -
MBO B16 4 Plate Pile Air-Feed Floor Mode...
BUSINESS Gomersal (West Yorkshire) May 5, 2024 2800.00 £ -
-
-
ROTAX 912 ULS 100 HP AIRCRAFT ENGINE
BUSINESS Husbands Bosworth (Leicestershire) May 4, 2024 2500.00 £ -
-
-
Leica TCRP1203 R300 Robot Total Station
BUSINESS Kings Sutton (Northamptonshire) May 3, 2024 2900.00 £ -
-
Brunson 270BN Universal Short Range Cali...
BUSINESS Willerby (East Yorkshire) May 3, 2024 2650.00 £ -
-
-
HAMMER C3 31 COMBINATION WOODWORKING MAC...
BUSINESS Hemel Hempstead (Hertfordshire) May 3, 2024 2400.00 £ -
-
-
ZEISS OPMI 1 FC FIBEROPTIC MICROSCOPE - ...
BUSINESS Lisburn (Nothern Ireland) May 2, 2024 1960.00 £ -
-
-
-
CNC Machining Center KORRADI VH800
BUSINESS Moreton in Marsh (Gloucestershire) May 1, 2024 5500.00 £ -