FEMCO DURGA 25E CNC TURNING CENTER + FANUC CONTROL
- 5900.00 £
- Published date: March 10, 2024
-
- Londres, London, United Kingdom
FEMCO DURGA 25E CNC TURNING CENTER + FANUC CONTROL
⭕ Just came from a shop that recently closed. Good looking Femco thats ready to go right back to work. Desirable CNC lathe with a good reputation. All in all, a very functional CNC lathe. Comes with chuck and 5C Nose Piece.
Here is some information from Femco:
The 25E Double-Disk Turret design accommodates 23 tools, allowing for more tools than any other machine of its type in the industry. Double-disk turret provides faster set-up and increases time in cut. Instead of having to stagger the O.D. and I.D. tools, you can group your tool set-ups by workpiece and spend less time indexing. The 25E has the fastest chip to chip time in the industry, the bi-directional programming of the double disk can index O.D. tools on separate disks, further maximizing your cut time. Reduces average set-up time from 1 hour 20 minutes to 15 minute part to part.
FEATURES:
Fanuc Series O-T CNC control
Three Jaw 8 Hydraulic Chuck
Hydraulic Tailstock
Tool Turret
4,500 Max. Spindle RPM
Chip Conveyor
SPECIFICATIONS:
CAPACITY:
Max. turning length..................23.62
Distance between centers...........25.59
Max. swing over bed......................17.72
Max. turning diameter....................9.84
HEADSTOCK:
Spindle nose / internal taper..........A2-6 / 1/20
Spindle diameter at front bearing............3.94
Hole through spindle.................................2.40 dia.
Chuck diameter....................................8
Bar capacity.........................................2.05
Spindle speed....................................3500 / 4800 RPM
Spindle motor.....................................10 / 14.7 HP
TURRET:
Type / number of stations................Double disk / 12 x 2
Turret clamping force.......................5600 lbs.
Tool select...........Bi-directional programing w/ automatic selection of shortest route
Turning tool size...O.D. turning - 3/4sq. / I.D. boring - 1 1/4
X -AXIS:
Travel....................5
Rapid traverse rate...........787 in/min
AC servo motor................0.8 HP
Diameter of ball screw............. 1.10 x P0.24
Z -AXIS:
Travel.....................24.80
Rapid traverse rate...........944 in/min
AC servo motor................1.2 HP
Diameter of ball screw............. 1.26 x P0.31
TAILSTOCK:
Quill diameter................2.95
Travel..............................3.94
Taper..............................#4 Morse Taper
Axial thrust of quill.............1200 lb @ 290 psi
GENERAL:
Overall Dimensions: 51 x 120 x 67 tall
Power: 230 volt, three phase
Made by Femco Inc.
This is a CNC Turning Center in good condition!
Model # DURGA - 25E
Serial # L5ECXXX
Here is some information from Femco:
The 25E Double-Disk Turret design accommodates 23 tools, allowing for more tools than any other machine of its type in the industry. Double-disk turret provides faster set-up and increases time in cut. Instead of having to stagger the O.D. and I.D. tools, you can group your tool set-ups by workpiece and spend less time indexing. The 25E has the fastest chip to chip time in the industry, the bi-directional programming of the double disk can index O.D. tools on separate disks, further maximizing your cut time. Reduces average set-up time from 1 hour 20 minutes to 15 minute part to part.
FEATURES:
Fanuc Series O-T CNC control
Three Jaw 8 Hydraulic Chuck
Hydraulic Tailstock
Tool Turret
4,500 Max. Spindle RPM
Chip Conveyor
SPECIFICATIONS:
CAPACITY:
Max. turning length..................23.62
Distance between centers...........25.59
Max. swing over bed......................17.72
Max. turning diameter....................9.84
HEADSTOCK:
Spindle nose / internal taper..........A2-6 / 1/20
Spindle diameter at front bearing............3.94
Hole through spindle.................................2.40 dia.
Chuck diameter....................................8
Bar capacity.........................................2.05
Spindle speed....................................3500 / 4800 RPM
Spindle motor.....................................10 / 14.7 HP
TURRET:
Type / number of stations................Double disk / 12 x 2
Turret clamping force.......................5600 lbs.
Tool select...........Bi-directional programing w/ automatic selection of shortest route
Turning tool size...O.D. turning - 3/4sq. / I.D. boring - 1 1/4
X -AXIS:
Travel....................5
Rapid traverse rate...........787 in/min
AC servo motor................0.8 HP
Diameter of ball screw............. 1.10 x P0.24
Z -AXIS:
Travel.....................24.80
Rapid traverse rate...........944 in/min
AC servo motor................1.2 HP
Diameter of ball screw............. 1.26 x P0.31
TAILSTOCK:
Quill diameter................2.95
Travel..............................3.94
Taper..............................#4 Morse Taper
Axial thrust of quill.............1200 lb @ 290 psi
GENERAL:
Overall Dimensions: 51 x 120 x 67 tall
Power: 230 volt, three phase
Made by Femco Inc.
This is a CNC Turning Center in good condition!
Model # DURGA - 25E
Serial # L5ECXXX
Phone number ✆ 025 8628 7688
Londres, London
Related listings
-
-
Projectina UCM Universal Comparison Micr...
BUSINESS Hartlebury (Worcestershire) April 19, 2024 3850.00 £ -
-
-
-
McElroy Pitbull Fusion Pipe - Business/c...
BUSINESS Boston Spa (West Yorkshire) April 17, 2024 1920.00 £
-
-
Hitachi S-3500N Scanning Electron Micros...
BUSINESS Bushey (Hertfordshire) April 17, 2024 8800.00 £ -
Brother PR-1000 Baby Lock 10 Needle Embr...
BUSINESS Bonchurch (Isle de Wight) April 17, 2024 3000.00 £
-
Fuji DL600 Dry Minilab - Business/commer...
BUSINESS Whitchurch (Shropshire) April 17, 2024 3000.00 £ -
-
-
Bale Wrapper Kuhn 4004 4014 - Business/c...
BUSINESS Northwood (Shropshire) April 15, 2024 7000.00 £ -
-
-
Kruss K100C Automated Processor Interfac...
BUSINESS Amberley (West Sussex) April 15, 2024 2950.00 £ -
-
-
-
IPG Photonics YLP-1 YTTERBIUM PULSED FIB...
BUSINESS Attleborough (Norfolk) April 14, 2024 2650.00 £ -
-
2 Perfect Co.uk Domain For Uk Based Busi...
BUSINESS Kirkby Overblow (North Yorkshire) April 14, 2024 1.00 £ -
-
-
-
-
Felder K975 Professional Panel Saw
BUSINESS Hemel Hempstead (Hertfordshire) April 13, 2024 3500.00 £
-
SCM T55 Elite S Spindle Moulder - Busine...
BUSINESS Turners Hill (West Sussex) April 13, 2024 2600.00 £ -
Potent Weed/Pollen For Sale, Can Meet F2...
BUSINESS Lichfield (Staffordshire) April 13, 2024 200.00 £ -
-
-
JTW International Plastic Scrap Compacto...
BUSINESS Penkridge (Staffordshire) April 13, 2024 6500.00 £ -
-
-
Houfek HB 1000 Vario Oscillating Sander ...
BUSINESS Sutton Courtenay (Oxfordshire) April 13, 2024 2250.00 £ -
1933 Theiman Tractor Restored On Steel W...
BUSINESS Finedon (Northamptonshire) April 13, 2024 2500.00 £
-
Fortimedix Stent Crimper Crimping Machin...
BUSINESS Kilmington (Wiltshire) April 13, 2024 12400.00 £ -
-