Peugeot 405 T16 XU10J4TE Turbo Race Engine 205 Mi16
- 1600.00 £
- Published date: February 15, 2024
-
- Blakeney, Norfolk, United Kingdom
Peugeot 405 T16 XU10J4TE Turbo Race Engine 205 Mi16
⭕ The current engine spec is as follows:
- XU10J4TE block, cleaned and painted otherwise standard. New cam belt and tensioners, new water pump. Brand new MLS head gasket and head bolts (head currently fitted to the engine)
- T16 head that has been cleaned, faced and ported by Serdi UK (look them up they are very well respected engine builders) with three angle valve seats re cut and valves refaced to match (the exhaust valves are sodium filled on the T16 and there is additional water cooling of the exhaust valves in the head). Brand new valve guides and oil seals. Brand new Gti6 hydraulic lifters (lighter than standard ones) with double valve spring seat shims fitted. Mi16x4 inlet and exhaust cams fitted with Peter Taylor (an Australian Peugeot guru) custom grind on the inlet. Piper vernier cam pulleys. Refurbished cam cover with crackle black finish and polished details. This head will produce some extremely good results I am sure of that!
- T16 nitrided crank (with original crank pulley, flywheel etc), original pistons and rods. ARP con rod bolts. The crank and rods were inspected by Serdi and all the rods were re honed. The pistons were all balanced to within a fraction of a gram. The whole rotating assembly was knife edge balanced again by Serdi.
- Custom inlet manifold with extra large throttle body (90mm if I remember correctly). Custom fuel rail (-8 connections welded on) with 660cc Siemens Deka injectors (these have been proven to work very well with the T16 engine).
- Dry sump pan (no dry sump pump is included). The pictures show the standard wet sump set up which I no longer have. You could always buy any XU10 oil pump and sump pan to restore the wet sump system easily and cheaply.
- Most original sensors and some pipe work. I was planning on replacing all the original oil breather system etc and get new sensors.
I am sure I have forgotten some things but it is a pretty complete package.
- XU10J4TE block, cleaned and painted otherwise standard. New cam belt and tensioners, new water pump. Brand new MLS head gasket and head bolts (head currently fitted to the engine)
- T16 head that has been cleaned, faced and ported by Serdi UK (look them up they are very well respected engine builders) with three angle valve seats re cut and valves refaced to match (the exhaust valves are sodium filled on the T16 and there is additional water cooling of the exhaust valves in the head). Brand new valve guides and oil seals. Brand new Gti6 hydraulic lifters (lighter than standard ones) with double valve spring seat shims fitted. Mi16x4 inlet and exhaust cams fitted with Peter Taylor (an Australian Peugeot guru) custom grind on the inlet. Piper vernier cam pulleys. Refurbished cam cover with crackle black finish and polished details. This head will produce some extremely good results I am sure of that!
- T16 nitrided crank (with original crank pulley, flywheel etc), original pistons and rods. ARP con rod bolts. The crank and rods were inspected by Serdi and all the rods were re honed. The pistons were all balanced to within a fraction of a gram. The whole rotating assembly was knife edge balanced again by Serdi.
- Custom inlet manifold with extra large throttle body (90mm if I remember correctly). Custom fuel rail (-8 connections welded on) with 660cc Siemens Deka injectors (these have been proven to work very well with the T16 engine).
- Dry sump pan (no dry sump pump is included). The pictures show the standard wet sump set up which I no longer have. You could always buy any XU10 oil pump and sump pan to restore the wet sump system easily and cheaply.
- Most original sensors and some pipe work. I was planning on replacing all the original oil breather system etc and get new sensors.
I am sure I have forgotten some things but it is a pretty complete package.
Phone number ✆ 01603 312796
Blakeney, Norfolk
Related listings
-
-
-
Greenhouse Croptober And More At Best Pr...
BABY / KIDS Wells Next the Sea (Norfolk) April 29, 2024 1.00 £
-
-
-
Full Size 4/4 Wood Maple Electric Violin...
BABY / KIDS East Dereham (Norfolk) April 24, 2024 65.00 £
-
-
-
*Blue Dream--Grade: A *Bubba Kush-l
BABY / KIDS Wells Next the Sea (Norfolk) April 21, 2024 400.00 £
-
-
-
Beautiful Akai GX-747 DBX W Rare RC-21 W...
BABY / KIDS Thorpe Market (Norfolk) April 10, 2024 1300.00 £
-
KUSK/COKE+/WEED/=ICE HIGHEST QUALITY IN ...
BABY / KIDS Swardeston (Norfolk) April 10, 2024 100.00 £ -
-
-
-
Leica APO-Telyt-R 400mm F2.8 4002.8 Modu...
BABY / KIDS Gillingham (Norfolk) April 4, 2024 1900.00 £ -
Dorchester- Home Visit Male Masseur Prov...
BABY / KIDS Wells Next the Sea (Norfolk) April 4, 2024 1.00 £
-
-
-
Young Male Gardener Available - Spring M...
BABY / KIDS Downham Market (Norfolk) April 3, 2024 1.00 £
-
AMAZING JAPANESE SAMURAI HANDMADE COSTUM...
BABY / KIDS Sheringham (Norfolk) April 2, 2024 1500.00 £ -
-