Ford 427 FE Rare Factory OEM Complete Engine Sidewinder

  • 1200.00 £
  • Published date: February 22, 2024
    • Glasgow, Scotland, United Kingdom

Ford 427 FE Rare Factory OEM Complete Engine Sidewinder


⭕ Ford 427 Side Oiler Block date code 2D27 (1972 Ford Service Block)
STD bore in good shape with 2 sleeves installed no ridge and the cylinders look straight.The only cylinder issue we see is a small pitting spot in the upper area of the number 8 cylinder.I dont have a clue what caused this and it is in the area of where the top ring runs.
Screw In Freeze Plugs
Block Square Decked
4-bolt Crossbolt mains on # 2,3 and 4.Main caps,main bolts and cross bolts & spacers installed and included.
The numbers on the block include a 66 427 on the back,a 427 with a 26 underneath it in the valley,and the 352 on the front like all FE motors
There is an area in the front by the number 1 cylinder which had a front bolt hole repaired on an ear that had a piece out of the block.This is old and it works fine.
Melling M-84-HV High Volume Oil Pump with heavy duty pump drive
CRANK RODS PISTONS
High Dome TRW Forged Pistons p/n L2299F std (high compression,12.5 to 13.5 range)
Rings Fit to Block
Lemans Capscrew Rods ground and shot peened # C6AE-E which had new rod bolts installed and resized
Steel Crankshaft C5AE-6300-C std / std bearings,cross drilled,screw in plugs on rod throws.It has the $ cast into crank.
Balanced rotating assembly
7 1/2 inch Harmonic Balancer C4AE-6316-E (great rubber) with crank spacer and bolt.This has the single pulley built into it.
C6 Flywheel/Flexplate with bolts
HEADS ROCKERS CAMSHAFT
Medium Riser Heads C5AE-F with date codes 5J3 and 6J10
Competition Valve Job 2.18 intake and 1.72 exhaust
Ported Exhaust & Gasket Matched,also opened at valve
1.76 Adjustable Rockers p/n 5750083 on rockers and stands C5AE-6531-A
Spring Height Set with Crane 99893 Valve Springs and 99954-16 Retainers
Guides machined for Crane Teflon 99822 Positive Valve Stem Seals
Crane Cam 341191 F-238/3200-2-14 close to the old Ford B cam
Intake 0.563 Exhaust 0.587 lift and Intake 300° Exhaust 310° duration
All cam retainer parts,bolts,FP drive,etc included.
Crane Double Row Timing Set
Crane 34645-16 Push Rods
Aluminum medium riser FoMoCo Intake Manifold C6AE-9425-K heard it called a Sidewinder.Valley pan and bolts included.This has the oil fill tube and cap.It has been painted blue,but could be returned to natural aluminum.This engine originally have a dual quad intake which has since been sold.We were running the Holley Projection Fuel Injection on top of this in the car which is why we put the single 4V intake on it.
Aluminum Timing Cover with pointer C1AE-6059-D.It has removeable fuel pump block off plate
Water Pump
Aluminum Mickey Thompson M/T Valve Covers finned aluminum painted black with Ford cast in and also H/P 427.Underneath they show 427 with a part number 3293900.These also include a pair of rare Offenhauser breathers attached.They are not perfect,but look good.

Phone number ✆ 07516 177988
Glasgow, Scotland

Related listings